Scope mounting question?
I have a T/C arms Encore and I just purchased a 28" Pro hunter barrel and a Nikon 4-12x50 scope, how high do the rings need to be for me to mount it properly? I see them in low, medium and high.
Answers:
Does anyone know where a person can get mosquito fish in Kansas, preferably for free?
I would be very suprised if it would fit in anything but high rings and not touch the barrel. This you definitely do not want. Use a little blue Loctitle or Guntite to each screw in the mount and rings to keep from loosening.Good choice on gun and scope manufacturers! My favorites.
Don't bother with the Ironsighter or any other see-through ring/mounts with this combination. With a 50 mm objective you will never see the open sights.
For those of you that don't know your firearms, the Encore is a weapon that you can exchange the barrels by taking off the forearm, driving out the pivot pin and putting on a different barrel reassembling in the reverse order. Having said that, there is no action to mount the scope on, the scope remains mounted to the barrel when it is removed from the receiver.
Dunno. As low as possible may be medium with that monster objective, but I'd bet you'll have to settle for high.
Value of Smith & Wesson 32 cal. serial # 14524, last patent August 4 1885?
I agree with a high base mount or you can try an Iron Sighter which allows you to sight with your open sight looking under the scope. I believe Weaver makes one also. Been hunting since 1948. Bigbair---(Never let them see you sweat!!!!)Has anybody been catching any fish at Eufaula Lake in Oklahoma?
You're going to have to use Hi rings and you're better off using a mounting system that puts it out on the barrell. Any gun that the action and barrell are not perminately attached will have issues with zero at some point.What is the value of a 1957 Remington 1100 Mint condition?
The high is a must and you might even did the extra high.More Questions & Answers...